Beginner’s Guide To Turf Installation:

 Have you just brought home your artificial turf but hiring a professional is not included in your budget? Well, if that's the case, then don’t you worry! In this article, we have jotted down the stepwise DIY guide for turf installation.   

However, turf installation is not as simple as seen; therefore, we recommend hiring a professional turf laying contractor Sydney. We understand artificial turf installation is the best way to change your home’s or office's appearance instantly. You can follow these easy steps to see your dream DIY project coming to life in seconds.  

 

But, let's just briefly discuss the types of artificial grass that can be used for various places: 

Different Types Of Material In Artificial Grass: 

So, as we know, most interior decors use DIY grass to get a unique look according to their client's satisfaction; therefore, various types of materials are available in the market. However, according to the material, placement and warranty, these materials have advantages and disadvantages. Here are the two most popular materials that are most commonly found:  

Polypropylene Turf: 

Polypropylene turf is one of the market's most commonly seen turf materials. To install polypropylene turf, you will always require infills because the material is less dense and can press down like a carpet. But, if you favour polypropylene turf, you can easily roll the grass using various tools like rollers. The sand infill makes these artificial grass soft and safer to play with. That’s why it is recommended for outdoor areas like lawns, golf clubs, kids' play areas, and gardens. Yet, you can always ask for help from turf laying contractor Sydney to know more about the material.  

Nylon turf: 

One of the other commonly found turf with better quality than polypropylene turf. Nylon turf is low maintenance and does not require infills as it comes with the stuff underneath it. All the grass strands stand straight and do not bend even after the activities like walking, running or playing. The material is sturdy and low maintenance so it can be more expensive than polypropylene turf. So, if you have a reasonable budget, we recommend nylon turf for long-term use.  

Step Wise Guide on How To Install Artificial Turf For Beginners: 

Once you know which material will be perfect for your DIY project. Here’s the time for installing it. We have mentioned some simple and easy steps that you can follow to lay your artificial turf quickly and safely. So, let’s get into it: 

 

But, first, you need to know which type of area you’re installing your turf on; here are two types: 

Laying It On Soft Surface: 

Soft areas already contain soil, mud, grass-like gardens, yards, and other house areas.  

Laying It On Hard Surface: 

While for the hard ones, we can count the flat surfaces like concrete, tiles, and others. 

Tools Required For Installation process: 

• Stanely knife 
• Measuring tape 
• Adhesive 
• Shovel 
• Turf cutter 
• Hammer gloves 
• Broom (to dust off) 
• Turf infill 
• Rollers 

Step Wise Installation Guide For Soft Surfaces: 

Step # 1- Measure The area: 

To get a smooth installation, it is necessary to measure the correct area. You can do it by using the measuring tape while measuring the longest width and length of the installation place.  

 

Once you’re done, you can ask the seller to get you the perfect size according to your measurements. However, we recommend beginners get some inches extra of the turf so that if the measurement accidentally goes wrong, they have their backup material.  

Step # 2- Prepare The Surface: 

For the second step, prepare the ground by becoming the soil, mud or anything else between the earth and turf. If you find this part challenging, just get help from turf laying contractor Sydney.  

Step # 3- Excavate And Level The Surface: 

Then, you’re done prepping your surface; it’s time to excavate and level it. This process helps maintain the water drainage and saves you from the hassle during rainy weather.  

Step # 4- Prepare The Borders & Edges: 

Afterwards, arrange cement edges around the borders and allow them to dry before laying your artificial turf. 

 

Step # 5- Lay Down The Artificial Grass: 

Now it’s time to lay your artificial grass on the prepared surface. Roll out any crease with the help of rollers for a smooth installation. After that, trim the extra edges and join the rest of the surface with the glue.  

Step Wise Installation Guide For Hard Surfaces: 

For hard surfaces, you have to start again by measuring your area with the help of measuring tape.  

Step # 2- Lay Down The Artificial Grass: 

Now, lay down the artificial grass to the surface and roll it out to prevent creasing.  

Step # 3- Trim And Join: 

Trim the excess turf with the help of a stanley knife to get the crisp and beautiful-looking edges and borders. Then join it with the glue or adhesive.  

Step # 4- Brush The Infills: 

Once the glue is dried, you can easily infill the artificial turf with the silica sand infills using a stiff bristle broom.  

 

So, these are some of the easy step-wise guides that can help you install artificial turf in any part of your house.  

Conclusion: 

While coming to an end of the topic, artificial turf is one of the best ways to upgrade your place's appearance instantly. Many high-end interior designers use this trick to quickly and straightforwardly elevate their designs. However, the process is not simple, and you may require a turf laying contractor in Sydney. Yet, if you want to try the DIY technique, we’ve listed some easy steps for ease.  

 

We hope this article has served you a helping hand. Do let us know if you enjoy this piece or not. 

 Disclaimer: This is a generic Information & post; content about the services can be changed from time to time as per your requirements and contract. To get the latest and updated information, contact us today or visit our website.